Bharat Heavy Electricals Limited

Bharat Heavy Electricals Limited has published Supply, Installation, Testing And Commissioning Of Passenger Elevator With Civil Works At Bhel Township, Sector - 17, Noida , Passenger Elevator , Passenger Elevator, (Capacity - 544 Kg, Four Landing, Total Rise – 8.9 Meter, Rated Speed – 1 M/Sec) , Civil Works For Lift Shaft , Demolishing R.C.C. Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In- Charge. , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge - In Cement Mortar. , Dismantling Steel Work In Single Sections Including Dismembering And Stacking Within 50 Metres Lead In: Channels, Angles, Tees And Flats , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. Sqm 39.00 , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. , Extra For Planking, Strutting And Packing Materials For Cavities (In Close Timbering) If Required To Be Left Permanently In Position. (Face Area Of Timber Permanently Left To Be Measured). , Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing:1:1½:3 (1 Cement : 1½ Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending,Placing In Position And Binding All Complete Above Plinth Level. - Thermo-Mechanically Treated Bars. , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Washed Stone Grit Plaster On Exterior Walls Height Upto 15 Metre Above Ground Level, In Two Layers, Under Layer 12 Mm Cement Plaster 1:4 (1 Cement : 4 Coarse Sand ), Furrowing The Under Layer With Scratching Tool, Applying Cement Slurry On The Under Layer @ 2 Kg Of Cement Per Square Metre, Top Layer 15 Mm Cement Plaster 1:1/ 2:2 (1 Cement: 1/2 Coarse Sand : 2 Stone Chipping 10 Mm Nominal Size), In Panels With Groove All Around As Per Approved Pattern, Including Scrubbing And Washing The Top Layer With Brushes And Water To Expose The Stone Chippings ,Complete As Per Specification And Direction Of Engineer-In-Charge (Payment For Providing Grooves Shall Be Made Separately). , Forming Groove Of Uniform Size In The Top Layer Of Washed Stone Grit Plaster As Per Approved Pattern Using Wooden Battens, Nailed To The Under Layer, Including Removal Of Wooden Battens, Repair To The Edges Of Panels And Finishing The Groove Complete As Per Specifications And Direction Of The Engineer-In-Charge :15 Mm Wide And 15 Mm Deep Groove. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. (8.2.2 Granite Stone Slab Colour Z-Black, Cherry/Ruby Red) As Approved By Engineer-In-Charge , 12 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Coarse Sand) , Neat Cement Punning. Last date of submission for this tender is 2025-09-03. This is a Passenger Lift tender in Noida, Uttar Pradesh